Clinical trials: Denture Retention
Denture Retention
A Clinical Study to Assess the Effectiveness of Use of Three Experimental Denture Adhesives Compared to Using No-Adhesive
The aim of the proposed clinical study is to investigate the efficacy of three experimental denture adhesive creams to improve denture hold over a period of 13 hours.
- Trial name
- NCT07496164
- Testing
- Experimental Denture Adhesive 1, Experimental Denture Adhesive 2, Experimental Denture Adhesive 3
- Where
- United States
- Volunteers
- 45 people, healthy volunteers welcome
- Sponsor
- HALEON
Denture Retention
A Study to Investigate a Method to Measure Food Occlusion by Denture Adhesives in Denture Wearers
The purpose of this study is to evaluate a methodology to determine the ability of a denture adhesive to restrict food ingress underneath dentures during eating.
- Trial name
- NCT03345108
- Testing
- Denture Adhesive Cream (Conventional Application), Denture Adhesive (Continuous Strip Application), No Adhesive
- Where
- United States
- Volunteers
- 48 people, healthy volunteers welcome
- Sponsor
- GlaxoSmithKline
Edentulous Mouth, Edentulous Jaw
Single-implant Overdentures Retained by the Novaloc Attachment System
The objective of this explanatory mixed methods study is to compare a novel attachment system (Novaloc) to a traditional alternative (Locator) for single implants in the mandible of edentate elders.
- Trial name
- NCT03126942
- Testing
- Novaloc, Locator
- Where
- Canada
- Volunteers
- 10 people
- Sponsor
- McGill University
Retention of 3D Printed Dentures
Retention of Complete Denture Using Rapid Prototyping
Nineteen patients will be selected from the clinic following the inclusion and exclusion criteria. Each one of them will receive two dentures.
- Trial name
- NCT03507179
- Testing
- 3d printed denture, conventional dentures
- Volunteers
- 2 people, healthy volunteers welcome
- Sponsor
- Cairo University
Denture Retention
A Bite Force Study Comparing Two New Test Adhesives With Currently Marketed Denture Adhesive
The objective of this 4-treatment, 4-period, randomized, crossover, proof of principle bite force study will be to compare bite force measurements over a 12 hour period across two (test) cream denture adhesives, with a currently…
- Trial name
- NCT02937870
- Testing
- Test Product 1, Test Product 2, Reference Product
- Where
- United States
- Volunteers
- 25 people, healthy volunteers welcome
- Sponsor
- GlaxoSmithKline
Complete Mandibular Dentures With Poor Retention
Evaluation of Three Hard Relining Materials in Complete Dentures
Purpose: The purpose of this study is to evaluate three hard relining materials after 3 and 6 months of use with mandibular complete dentures.
- Trial name
- NCT02203279
- Testing
- Rebase II Fast, Flexacryl, Vertex
- Where
- Syria
- Volunteers
- 36 people
- Sponsor
- Damascus University
Edentulous Alveolar Ridge
To Evaluate the Complete Mandibular Dentures Produced Via 3D Printing in Comparison to Those Constructed From Metal-reinforced Acrylic Resin Regarding Their Retention
in this study we will construct denture for patient by different way and material one of this denture constructed digitally and the other one constructed in conventional way with metal reinforced.
- Trial name
- retention (NCT07061860)
- Testing
- digital complete denture, metal reinforced complete denture
- Where
- Egypt
- Volunteers
- 20 people, healthy volunteers welcome
- Sponsor
- National Research Centre, Egypt
Edentulous Mouth
Retention of Computer Aided Design and Computer Aided Manufacturing Titanium Versus Co/Cr Single Dentures.
Steps in short: Undergoing the conventional steps of maxillary single denture construction till the step of framework construction that will be designed and constructed using CAD/CAM after optical scanning of the master cast ( 2…
- Trial name
- NCT03675594
- Testing
- CAD/CAM titanium denture base, CAD/CAM cobalt/chromium denture bases
- Where
- Egypt
- Volunteers
- 12 people, healthy volunteers welcome
- Sponsor
- Cairo University
Immediate Dental Implant Loading, Denture, Complete
Immediate Loading of 4 Guided Implants Supporting a Maxillary Overdenture Using a Novaloc TiN Retention System
Complete dentures represent the traditional dental treatment for patients without teeth. However, retention and stability of this type of denture are often lacking, so dental implants are indicated in order to improve the…
- Trial name
- NCT06083506
- Testing
- NOVALOC TiN retained maxillary overdenture
- Where
- United States
- Volunteers
- 17 people, healthy volunteers welcome
- Sponsor
- West Virginia University
Denture Retention
To Evaluate Oral Health and Quality of Life Associated With Use of a Denture Adhesive
The aim of this study is to evaluate the use of a denture adhesive and its ability to demonstrate the improvement in overall gum-health and to improve the oral health related quality of life (OHrQoL) in participants who wear full…
- Trial name
- NCT03807700
- Testing
- Experimental Denture Adhesive
- Where
- Canada
- Volunteers
- 119 people, healthy volunteers welcome
- Sponsor
- GlaxoSmithKline
Edentulous Alveolar Ridge In Mandible, Complete Edentulism
Compare the Difference in Occlusal Force Distribution and Denture Retention Using 2 Different Denture Base Materials in Implant Retained Overdenture
The global increase in the aging population has led to a rise in total edentulism, which remains a major public health concern. two-implant-retained mandibular overdentures have been regarded as the standard of care, offering…
- Conditions
- Edentulous Alveolar Ridge In Mandible, Complete Edentulism, Dental Implant, Attachments
- Trial name
- NCT07250503
- Testing
- Conventional acrylic resin denture, Flexible resin denture
- Where
- Egypt
- Volunteers
- 24 people, healthy volunteers welcome
- Sponsor
- Al-Azhar University
Complete Edentulism
Denture Retention of Intra-orally Scanned Versus Extra-orally Scanned Digitally Printed Maxillary Denture in Completely Edentulous Patients
The goal of this clinical trial is to evaluate denture retention in intra-orally scanned versus extra-orally scanned digitally printed maxillary dentures in completely edentulous patients. The main question is : 1.
- Trial name
- NCT07290322
- Testing
- Intaorally scanned methods, extraorally scanned methods
- Where
- Egypt
- Volunteers
- 8 people, healthy volunteers welcome
- Sponsor
- Cairo University
Anodontia of Permanent Dentition
Retention of Metal Reinforced Polyamide Denture Base and Heat Cured Acrylic Resin Denture Base in Complete Mandibular Denture
The trial is done in order to reinforce polyamide to improve its modulus of elasticity to be able to use it as a denture base material in all clinical cases
- Trial name
- NCT03385746
- Testing
- polyamide, heat cured acrylic resin
- Volunteers
- 12 people
- Sponsor
- Cairo University
Edentulism, Denture Retention
Retention of Three Different Types of Telescopic Attachments
This study was conducted on thirty patients. These patients were divided into three groups in a random manner to compare the retention forces between three different types of secondary crowns used to stabilize two implant…
- Trial name
- Overdenture (NCT06632548)
- Testing
- telescopic overdenture
- Where
- Egypt
- Volunteers
- 30 people
- Sponsor
- Moatz Aly Ahmed Hussien
Edentulism Nos
Accuracy of 3D Printed Complete Dentures Using Two Impression Techniques: RCT
the aim of this crossover randomized controlled clinical trial is comparing retention of 3D printed maxillary complete dentures produced from thermoplastic impression trays and conventional acrylic impression trays.
- Trial name
- NCT04982510
- Testing
- complete denture
- Where
- Egypt
- Volunteers
- 11 people, healthy volunteers welcome
- Sponsor
- Cairo University
Dental Diseases, Dental Trauma
Using Digital Technology Versus Conventional Relining Procedure for Correction of Loose Maxillary Complete Denture
This study aimed to evaluate the use of computer added designning / computer added manufacturing (CAD/ CAM ) technology versus conventional relining procedure for treating ill-fitted loose maxillary complete denture and its…
- Conditions
- Dental Diseases, Dental Trauma, Bone Remodeling Disorder
- Trial name
- NCT06366321
- Testing
- relining technique, CAD/CAM milling technique
- Where
- Egypt
- Volunteers
- 12 people, healthy volunteers welcome
- Sponsor
- British University In Egypt
Edentulism
Single-implant Versus Two-implant Mandibular Overdentures
This randomized controlled trial compares a mandibular overdenture retained by one implant placed in the parasymphyseal or canine region with a mandibular overdenture retained by two implants placed in the interforaminal region…
- Trial name
- NCT07408778
- Testing
- Single-implant mandibular overdenture (parasymphyseal/canine region), Two-implant mandibular overdenture (interforaminal)
- Where
- Palestinian Territories
- Volunteers
- 32 people
- Sponsor
- Rola Shadid
Denture Retention
The Effect of Clip Material on the Retention of Implant Supported Mandibular Overdenture
This study is aiming to evaluate the retention of implant supported mandibular overdenture using two different clip materials namely polyoxymethylene (POM) and poly-ether-ether-ketone (PEEK) on PEEK bar at three-time intervals…
- Trial name
- NCT06866067
- Testing
- PEEK clip, Nylon clip
- Where
- Egypt
- Volunteers
- 12 people
- Sponsor
- MTI University
Completely Edentulous Patients
Three Dimensional Printed Versus Conventional Heat Cured Acrylic Complete Denture
Introduction: One major complaint frequently voiced by complete denture wearers is denture retention. Conventional denture disadvantage is heat-curing resin deformation.
- Trial name
- NCT05585008
- Testing
- two different denture manufacturing technique (heat cure pack and press technique(heat cure acrylic,Acrostone,Egypt)/3d printed dneture(HARZ lab,Russia))
- Where
- Egypt
- Volunteers
- 20 people
- Sponsor
- Suez Canal University
Edentulism
Comparison of Open-Mouth and Closed-Mouth Impression Techniques for Complete Dentures
This randomized controlled trial compares two final impression techniques for complete dentures, the open mouth technique and the closed mouth technique.
- Trial name
- NCT07832149
- Testing
- Open mouth impression technique, Closed mouth impression technique
- Where
- Pakistan
- Volunteers
- 88 people
- Sponsor
- Watim Medical & Dental College