DENTAL IMPLANTATIONNCT06947070
Surface Topography and Color Stability of Implant Supported 3D Printed Provisional Restorations
A study testing To evaluate the surface topography and color stability of 3D printing provisional material. in people with DENTAL IMPLANTATION, run by Postgraduate Institute of Dental Sciences Rohtak at 1 site in India.
Trial summary
Patient attending the Outdoor Patient Department of the Department of Prosthodontics at Post Graduate Institute of Dental Sciences, Rohtak will be screened. The screening will include history taking and clinical examination of the partially edentulous patients. Read more about this study
- Who is it for?
- Ages 20 to 60 yearsHealthy volunteers can take part
- Conditions the study is for
- DENTAL IMPLANTATION
- What is being tested?
- To evaluate the surface topography and color stability of 3D printing provisional material.
- Type of treatment
- Surgery or procedure
- Could I receive a placebo?
- No, everyone receives an active treatment
- How many people
- 24 participants
- Where
- 1 siteIndia
- Study dates
- 1 Jul 2023to 30 Apr 2025
- Phase
- Interventional
- Are there results?
- Not yet: the study is under way
Key requirements
Who can take part, as listed by the sponsor. Only the study team can confirm whether you are eligible, so take this list to your doctor.
- Ages 20 to 60 years
- All sexes
- Healthy volunteers accepted
- Adult
Who may be able to join
- Subjects consented to participate in the study.
- Subjects with maintainable oral hygiene.
- Subjects with adequate edentulous space at the prospective implant site.
- Subjects with availability of adequate quantity and quality of bone.
Who cannot join
- Subject with presence of infection around proposed site of implant placement.
- Subjects with any condition that would interfere with the soft tissue and bone healing.
- Subjects in which surgical procedure is contraindicated for any reasons.
Trial locations and contacts
1 site in 1 country. Contact the study team or a site near you to ask about taking part.
About this study
Official title: "Comparative Evaluation of Surface Topography and Color Stability of Implant Supported Provisional Restorations Fabricated Using Two Different 3D Printing Materials in Mandibular Posterior Region: A Randomized Clinical Trial"
Patient attending the Outdoor Patient Department of the Department of Prosthodontics at Post Graduate Institute of Dental Sciences, Rohtak will be screened. The screening will include history taking and clinical examination of the partially edentulous patients. Patients will be selected according to the inclusion and exclusion criteria. Single stage endosseous implants will be placed. Two different Biocompatible 3D printed Polymethyl methacrylate resin will constitute two groups, Group A and Group B. 3D printed provisional poly methyl methacrylate resin crowns will be fabricated with Group- A and Group-B material followed by evaluation of surface topography and color stability after intraoral use.
Read the detailed description
Title: "Comparative Evaluation of Surface Topography and Color Stability of Implant Supported Provisional Restorations Fabricated using Two Different 3D Printing Materials in Mandibular Posterior Region: A Randomized Clinical Trial".
Rationale: The study needs to verify the surface topography and color stability of implant supported provisional restorations fabricated using two different 3D printing materials in mandibular posterior region.
Aim and objectives: To evaluate the surface topography and color stability of implant supported provisional restorations fabricated using two different 3D printing materials in mandibular posterior region.
Setting: Department of Prosthodontics and Crown \& Bridge, PGIDS Rohtak. Study Design: Randomised clinical trial. Population/Participants: Provisional restoration will be fabricated using two different 3D printing materials.
Sample Size: Total of 24 samples will be prepared (n=12 samples per test group).
Methodology: This is an in-vivo study and will be carried out in the Department of Prosthodontics and Crown \& Bridge, Post Graduate Institute of Dental Sciences, Rohtak with the purpose to evaluate the surface topography and color stability of implant supported provisional restorations fabricated using two different 3D printing materials in mandibular posterior region.
Outcome Measures: Measuring the surface topography using profilometer and color stability using spectrophotometer.
Statistical Analysis: Data obtained would be compiled on MS Office Excel Sheet (v 2010) and will be subjected to statistical analysis using statistical package for social sciences (SPSS v 21.0, IBM). Intergroup and intragroup comparisons will be done according to distribution of data.
- Conditions
- DENTAL IMPLANTATION
- Being tested
- To evaluate the surface topography and color stability of 3D printing provisional material.
- Keywords
- 3D printed provisional restorations
What participants receive
What participants receive. In a randomised study each person is assigned to one group by chance.
To evaluate the surface topography and color stability of 3D printing provisional material.Procedure or surgery
Subjects with single stage implant placement followed by early non-functional loading with implant supported provisional restorations fabricated using 3D printing provisional material.
| Study group | Role | What they receive |
|---|---|---|
| To evaluate the surface topography and color stability of Group I 3D printing provisional material. | Active comparator | Not described Receives: Procedure: To evaluate the surface topography and color stability of 3D printing provisional material. |
| To evaluate the surface topography and color stability of Group II 3D printing provisional material. | Active comparator | Not described Receives: Procedure: To evaluate the surface topography and color stability of 3D printing provisional material. |
What is being measured
The primary outcome is the main question the study is designed to answer.
Surface topography of provisional restorations.
The surface topography of implant supported provisional restorations fabricated using two different 3D printing materials evaluated using Profilometer.
Measured: 2 years
Color stability of provisional restorations
The color stability of implant supported provisional restorations fabricated using two different 3D printing materials evaluated using Spectrophotometer.
Measured: 2 years
Timeline
From the start of the study to its completion; the mark is today. Estimated dates are the sponsor’s plan.
- First posted27 Apr 2025
- Study start1 Jul 2023
- Primary completion24 Apr 2025 (estimated)
- Study completion30 Apr 2025 (estimated)
Resources
- Official record on ClinicalTrials.govThe registry entry this page is built from, with its full change history.
- Other trials for DENTAL IMPLANTATIONStudies of the same condition, open and under way.
- More trials run by Postgraduate Institute of Dental Sciences RohtakThe sponsor's other registered studies.
- What the trial phases meanHow a treatment moves from first tests in people to approval.
More details
For doctors and researchers: how the study is designed, who runs it, and its registry IDs.
Study design
- Study type
- Interventional
- Phase
- Phase N/A
- Primary purpose
- Treatment
- Allocation
- Randomised
- Intervention model
- Parallel groups
- Masking
- Quadruple blind
- Who is masked
- Participant, Care provider, Investigator, Outcomes assessor
- Enrolment
- 24 participants (estimated)
Sponsor and investigators
- Lead sponsor
- Postgraduate Institute of Dental Sciences Rohtak
- Sponsor type
- University, hospital or other
- Responsible party
- Sponsor
- Investigators
- Kritika Diwan, BDS, Principal investigator, PGIDS, Rohtak
IDs, dates and publications
- ClinicalTrials.gov ID
- NCT06947070
- Sponsor's protocol ID
- Dr. Kritika Diwan
- Status last verified
- Apr 2025
- First submitted
- 13 Jun 2024
- Last updated
- 27 Apr 2025
- Results posted
- No
- Data monitoring committee
- Yes
- FDA-regulated drug
- No
- FDA-regulated device
- No
- Individual data sharing
- No
Study at a glance
From the registry record, last updated by the sponsor on 27 Apr 2025. Recruitment status is as the sponsor reported it: confirm with the study team.
- Official title
- "Comparative Evaluation of Surface Topography and Color Stability of Implant Supported Provisional Restorations Fabricated Using Two Different 3D Printing Materials in Mandibular Posterior Region: A Randomized Clinical Trial"
- ClinicalTrials.gov ID
- NCT06947070
- Acronym / sponsor ID
- Dr. Kritika Diwan
- Conditions
- DENTAL IMPLANTATION
- Keywords
- 3D printed provisional restorations
- Study type
- Interventional
- Recruitment status
- Recruiting
- Enrolment
- 24 participants (estimated)
- Lead sponsor
- Postgraduate Institute of Dental Sciences RohtakUniversity, hospital or other
- Study start
- 1 Jul 2023 (actual)
- Primary completion
- 24 Apr 2025 (estimated)
- Study completion
- 30 Apr 2025 (estimated)
- First posted
- 27 Apr 2025 (actual)
- Results
- Not posted in the source record
Clinical summary
The research question as the sponsor registered it. This describes what the study plans to test, not what it found.
Patient attending the Outdoor Patient Department of the Department of Prosthodontics at Post Graduate Institute of Dental Sciences, Rohtak will be screened. The screening will include history taking and clinical examination of the partially edentulous patients. Patients will be selected according to the inclusion and exclusion criteria. Single stage endosseous implants will be placed. Two different Biocompatible 3D printed Polymethyl methacrylate resin will constitute two groups, Group A and Group B. 3D printed provisional poly methyl methacrylate resin crowns will be fabricated with Group- A and Group-B material followed by evaluation of surface topography and color stability after intraoral use.
Detailed description
Title: "Comparative Evaluation of Surface Topography and Color Stability of Implant Supported Provisional Restorations Fabricated using Two Different 3D Printing Materials in Mandibular Posterior Region: A Randomized Clinical Trial".
Rationale: The study needs to verify the surface topography and color stability of implant supported provisional restorations fabricated using two different 3D printing materials in mandibular posterior region.
Aim and objectives: To evaluate the surface topography and color stability of implant supported provisional restorations fabricated using two different 3D printing materials in mandibular posterior region.
Setting: Department of Prosthodontics and Crown \& Bridge, PGIDS Rohtak. Study Design: Randomised clinical trial. Population/Participants: Provisional restoration will be fabricated using two different 3D printing materials.
Sample Size: Total of 24 samples will be prepared (n=12 samples per test group).
Methodology: This is an in-vivo study and will be carried out in the Department of Prosthodontics and Crown \& Bridge, Post Graduate Institute of Dental Sciences, Rohtak with the purpose to evaluate the surface topography and color stability of implant supported provisional restorations fabricated using two different 3D printing materials in mandibular posterior region.
Outcome Measures: Measuring the surface topography using profilometer and color stability using spectrophotometer.
Statistical Analysis: Data obtained would be compiled on MS Office Excel Sheet (v 2010) and will be subjected to statistical analysis using statistical package for social sciences (SPSS v 21.0, IBM). Intergroup and intragroup comparisons will be done according to distribution of data.
Study design
- Primary purpose
- Treatment
- Allocation
- Randomised
- Intervention model
- Parallel groups
- Masking
- Quadruple blind (participant, care provider, investigator, outcomes assessor)
- Number of arms
- 2
| Arm | Type | Receives |
|---|---|---|
| To evaluate the surface topography and color stability of Group I 3D printing provisional material. | Active comparator | Procedure: To evaluate the surface topography and color stability of 3D printing provisional material. |
| To evaluate the surface topography and color stability of Group II 3D printing provisional material. | Active comparator | Procedure: To evaluate the surface topography and color stability of 3D printing provisional material. |
Who may qualify
- Ages
- 20 to 60 years
- Sex
- All
- Healthy volunteers
- Accepted
- Age groups
- Adult
Key inclusion criteria (4 listed)
- Subjects consented to participate in the study.
- Subjects with maintainable oral hygiene.
- Subjects with adequate edentulous space at the prospective implant site.
- Subjects with availability of adequate quantity and quality of bone.
Key exclusion criteria (3 listed)
- Subject with presence of infection around proposed site of implant placement.
- Subjects with any condition that would interfere with the soft tissue and bone healing.
- Subjects in which surgical procedure is contraindicated for any reasons.
Eligibility is decided by the study team after screening; this overview does not establish that a patient qualifies. Full inclusion and exclusion criteria.
Interventions
| Intervention | Type | Arms |
|---|---|---|
| To evaluate the surface topography and color stability of 3D printing provisional material.Subjects with single stage implant placement followed by early non-functional loading with implant supported provisional restorations fabricated using 3D printing provisional material. | Procedure or surgery | To evaluate the surface topography and color stability of Group I 3D printing provisional material., To evaluate the surface topography and color stability of Group II 3D printing provisional material. |
Primary outcome
Surface topography of provisional restorations.
Time frame: 2 years
The surface topography of implant supported provisional restorations fabricated using two different 3D printing materials evaluated using Profilometer.
Color stability of provisional restorations
Time frame: 2 years
The color stability of implant supported provisional restorations fabricated using two different 3D printing materials evaluated using Spectrophotometer.
Results and safety
This study is still under way. Results are not available in the source record yet.
Research links
- Official record on ClinicalTrials.govLast updated by the sponsor 27 Apr 2025.
- Individual participant dataSharing planned: No
Related trials for DENTAL IMPLANTATION
Not yet recruiting
Free Soft Tissue Grafts (FSTG) Using Autograft Palatal Donor Tissue vs. Xenograft Collagen Matrix (Zderm™)
Gingival Recession Localized Moderate, Dental Implant
Not yet recruiting
Safety Assessment of Placing a Single Dental Implant Without Antibiotic Prophylaxis in Simple Cases: A Pilot Study
Tooth Loss and Rehabillitation, Dental Implant Failure
RecruitingObservational study
Clinical and Radiographic Evaluation of Dentsply Sirona PrimeTaper Implants
Dental Implants
Active, not recruiting
The Aim of the Study Will be Clinically and Radio Graphically Comparison of Two Implant Designs Used to Treat Atrophied Mandible . Implant Design Comparison Will Done for Implant Stability,Peri-implant Soft Tissue Health Changes and Bone Changes .Patients Will be Divided Randomly Into Two Group
Dental Implant Bone Loss, Peri-Implant Health
Not yet recruiting
Effect of Ascorbic Acid-Loaded I-PRF With Partially Demineralized Dentin Graft on Alveolar Ridge Preservation
Alveolar Ridge Preservation Post-Extraction Bone Healing Dental Implant Site Development Tooth Loss, Alveolar Bone Regeneration Following Odontectomy
Referral and contact
AzTrials does not enrol participants or take referrals. Contact the study team or a site listed below; they decide who can take part.
Kritika Diwan, BDS principal investigator
PGIDS, Rohtak
1 site in 1 country: see every site and its status.
Questions about this trial
What is this clinical trial studying?
A study testing To evaluate the surface topography and color stability of 3D printing provisional material. in people with DENTAL IMPLANTATION, run by Postgraduate Institute of Dental Sciences Rohtak at 1 site in India.
The full registered description is in the About this study section and the official record.
Who may be eligible to take part?
The sponsor lists 4 inclusion and 3 exclusion criteria. Eligibility is decided by the study team after screening, so read the full criteria and contact a listed site.
Is this clinical trial currently recruiting?
The record says: looking for participants now, as of the sponsor's last update on 27 Apr 2025. Status can change between updates, so confirm with the study contact before making plans.
Where is the study taking place?
The record lists 1 site in India. Whether a site is taking part right now should be confirmed with that site. See every site.
What are the possible benefits and risks?
They depend on the study and the treatment, and no study can promise a benefit. The study team explains the known risks during informed consent, before anyone joins; the record itself does not list them.
Are results available for this study?
This study is still under way. Results are not available in the source record yet.
How can a doctor refer a patient or contact the research team?
Contact Manu Rathee, MDS (09416141376, ratheemanu@gmail.com), or a site near the patient. AzTrials does not enrol participants or take referrals.
What does the primary outcome measure?
Surface topography of provisional restorations. (time frame: 2 years). The study lists 2 primary outcomes in all. It is what the study was designed to measure, not a finding.
Where can I read the original study information?
Does a listing mean the treatment is approved or proven to work?
No. A listing means the study is registered. It does not show that the treatment is safe, works, or is approved by a regulator.
How often is this information updated?
AzTrials copies changed records from ClinicalTrials.gov every night and reloads the whole registry every week. The sponsor last updated this record on 27 Apr 2025.